Installing A Prehung Interior Door

Interior doors are a great way to update and accent your decor without too much commitment or expense.

Installing a prehung interior door. How to install a prehung interior door parts of a prehung door. If the bubble doesn t settle in the exact spot find an accurate level. Double check to be sure the door opens in the desired location and direction.

Then flip the level end for end and check the bubble. Typically both jambs are furnished with casings already attached. Measure down to the floor on the hinge side using measuring tape and note the measurement.

In this video ask this old house general contractor tom silva shows a homeowner the proper way to install a pre hung interior door for a closet. See below for a shopping. Memorize the bubble s position.

Use a level to find a level spot on the rough opening. Pro tips for how to install a prehung door. Mark the pre hung door for the opening adding an inch or two for carpet to run underneath the door.

Put the door in the opening and slide it until the jamb is flush with the wall. Purchase a door to fit the rough opening in the wall. Prehung doors hang on a jamb that is split into two pieces.

The split jamb has a groove under the stop so it can slide over the edge of the main jamb. Then cut the door along the mark image 3. The door is attached to the main jamb which is installed first.